Tilt & Rotary Table (0.001°)
The braking mechanism adopts hydraulic braking. An air/hydraulic booster is used without requiring a hydraulic power unit.
The tilt axis adopts double-sided expansion braking, which not only increases braking force but also greatly reduces vibration.
The tilt axis features a tilt angle of +30° ~ -120°.
| Worktable | |
|---|---|
| Table Size | Ø320 mm |
| T-slot (size x number x dist.) | 12H7 x 4 |
| Max. Table Load | 150 kg |
| Travel | |
| X Axis | 600 mm |
| Y Axis | 550 mm |
| Z Axis | 500 mm |
Distance from Spindle Nose to Worktable | 50 ~ 500 mm |
| Guideway Type ( X, Y, Z Axis ) | Linear Guideway |
| Feed | |
| Rapid Traverse X-axis | 40 m / min |
| Rapid Traverse Y-axis | 40 m / min |
| Rapid Traverse Z-axis | 30 m / min |
| Cutting Feed Rate | 18,000 mm/min |
| Min. Input Increment | 0.001 mm |
| Spindle | |
| Drive Type | Direct Drive |
| Spindle Motor | 7.5 kW (10HP) / 5.5kW (7.5HP) |
| Spindle Taper | N.T.40 |
| Spindle Speed | 10,000 rpm |
| Spindle Bearing Diameter | Ø70 mm |
| Max. Spindle Torque | 47N-m |
| Cooling / Lubrication | Oil Cooling / Grease Lubrication |
| Automatic Tool Changer(A.T.C) | |
| Tool Magazine Capacity | 24 Tools |
| Tool Holder | BT40 |
| Pull Stud | 45° |
| Max. Tool Weight | 7 kg |
| Max. Tool Length | 265 mm |
| Max. Tool Diameter | Ø95 mm |
| Max. Diameter with Adjacent Pocket Empty | Ø185 mm |
| Tool Selection | Random |
| Motors | |
| X Axis Servo Motor | 4 Kw (5.3 HP) |
| Y Axis Servo Motor | 4 Kw (5.3 HP) |
| Z Axis Servo Motor | 4 Kw (5.3 HP) |
| 4th/5th AXIS | ||
|---|---|---|
| Max. work piece size | Ø320 x 280 mm | |
| Torque | 25 kg-m | |
| Direction | Rotating axis | Tilting axis |
| Brake type | Drum type | Double drum type |
| Angles | 360° | +30° ~ -120° |
| Max. Speed | 25 rpm | 25 rpm |
| Installation Requirements | |
|---|---|
| Power Requirement | 36 KVA |
| Air Pressure | 6 kg / cm2 |
| Coolant Pump | 3 / 4 HP |
| Coolant Tank Capacity | 280 L |
| Machine Net Weight | 7,000 kg |
We reserve the right to modify the design without prior notice.
Heat Exchanger
Portable Manual Pulse Generator
Fully Enclosed Guard
Ethernet Function
Auto Power-off Function
Warning Light
Automatic Lubrication Device
Work light
Tools & Tool Kit
Spare Fuses
Swivel Control Panel
Spindle Oil Cooling
24-Tool Cam-type ATC System
Rigid Tapping
Chip Augers on Base
5-Axis Control / 4-Axis Simultaneous Function
A, C Axis Linear Scale (±10")
Screw Type Chip Conveyor With Chip Bins
Flat Type ChipConveyor and Chip Bin
Coolant Through Spindle With Filter
Bed Coolant Wash
Automatic Tool Length Measuring Device
Automatic Workpiece Measuring Device
Linear Scale
30, 32, 40 Tools Cam Type ATC
12,000 / 15,000 rpm Direct Drive Spindle with 15HP
15,000 rpm Direct Drive Spindle with 25HP
15,000 rpm Built-in Spindle with 20HP
Hollow Ballacrew with Cooling System
