Table | |
|---|---|
| Table Size | 1,700 x 820 mm |
| T-Slots (Width × Qty) | 22 x 5 mm |
| Max. Table Load | 1,500 kgw |
| Travel | |
| X Axis Travel | 1,350 mm |
| Y Axis Travel | 630 mm |
| Z Axis Travel | 400 mm |
Distance from Horizontal Spindle Center to Table Surface | 255 ~ 655 mm |
| Feed | |
| Cutting Feedrate | 1 ~ 4,000 mm/min |
| Rapid Traverse Rate | 10,000 mm/min |
| Minimum Feed Increment | 0.001 mm |
| Spindle | |
| Machinable Module | M0.5 ~ M12 |
| Tool Outer Diameter | Ø115 x Ø180 |
| Arbor Outer Diameter | Ø40h6 |
| Tool-Arbor Fixing Key | 10 (W) x 8 (H) mm |
| Arbor Speed (Stepless) | 0 ~ 180 RPM |
| Max. Tool Width | 68 mm |
| Motors | |
| Spindle Drive Motor (Continuous) | 11 kW |
| 30-Minute Rating | 15 kW |
| Servo Drive Motors for X, Y, Z Axis | 3 Kw |
We reserve the right to modify the design without prior notice.
Heat Exchanger
Portable Manual Pulse Generator
Head Side Spray Device
Screw Chip Remover
Semi-Enclosed Guard
RS-232 Interface
Automatic Power-off Function
Warning Light
Automatic Lubrication Device
Work Light
Tools & Tool Box
Spare Fuse
Suspended Control Panel
Coolant Cooling & Filtration Unit
Track-Type Magnetic Scraper Chip Conveyor
Coolant & Air Gun
3-Axis Digital Scale Feedback System
Permanent Magnetic Electromagnetic Chuck Fixture
Fully Enclosed Guard
