Worktable | ||
|---|---|---|
| Table Size | 630 x 630 mm | |
| Max. Table Load | 1,200 kg | |
| Minimum Rotation Angle | 1° | |
| A.P.C Table Exchange Type | Rotary Type | |
| Travel | ||
| X Axis Travel | 1,000 mm | |
| Y Axis Travel | 900 mm | |
| Z Axis Travel | 900 mm | |
| Distance from Spindle Nose to Table Surface | 200 ~ 1,100 mm | |
| Distance from Spindle Center to Table Surface | 80 ~ 980 mm | |
| Feed | ||
| X/Y/Z Axis Cutting Feed Rate | 1 ~ 18,000 mm/min | |
| X/Y/Z Axis Rapid Traverse | 40 m/min | |
| Minimum Input Increment | 0.001 mm | |
| Spindle | ||
| Spindle Taper | N.T.50 | |
| Spindle Speed | 100 ~ 10,000 rpm | |
| Spindle Motor | α22 / 10,000i | |
| Automatic Tool Changer | ||
| Tool Magazine Capacity | 60 Tools | |
| Tool Holder Type | BT50 | |
| Max. Tool (Diameter × Length) | Ø120 x 500 mm | |
| Max. Tool Weight | 20 kg | |
| Max. Diameter (With Adjacent Pockets Empty) | Ø250 mm | |
| Tool Selection Method | Bi-directional Selection | |
| Motors | ||
| Spindle Motor (30-min Rated) | 22 kw (30hp) / 26 kw(35hp) | |
| X Axis Servo Motor | 7 Kw | |
| Y Axis Servo Motor | 7 Kw | |
| Z Axis Servo Motor | 7 Kw | |
| Machine Weight, Floor Space & Packing | ||
| Floor Space | 3,700 x 6,300 mm | |
| Machine Net Weight | 23,500 kg | |
We reserve the right to modify the design without prior notice.
Spindle Cooling Unit
Heat Exchanger
Automatic Pallet Changer
Separate Manual Pulse Generator
X, Y, Z Axis Linear Guideways
Flood Coolant System
Coolant Tank
Screw Type Chip Conveyor
Sleep Switch
Warning Light
Work Light
Tool Box
Tool Magazine Capacity: 60, 90
Spindle Through Coolant
Hinge Belt Chip Conveyor with Chip Cart
BT40 / 15,000rpm Direct-Drive Spindle
Automatic Tool Length Measurement
Automatic Centering Device
0.001° Continuous Indexing B-Axis
