Worktable | |
|---|---|
| Table Size | 1,250 x 1,250 mm |
| Minimum Rotation Angle | 5° |
| Height of Table from Floor | 1,300 mm |
| Max. Table Load | 4,000 kg |
| Travel | |
| X Axis Travel | 1,800 mm |
| Y Axis Travel | 1,500 mm |
| Z Axis (Spindle Head) Travel | 1,300 mm |
| Distance from Spindle Nose to Table Surface | 350 ~ 1,650 mm |
| Distance from Spindle Centerline to Table Surface | 75 ~ 1,575 mm |
| Feed | |
| X Axis Rapid Feed Rate | 15 m/min |
| Y Axis Rapid Feed Rate | 15 m/min |
| Z Axis Rapid Feed Rate | 15 m/min |
| Cutting Feed Rate | 10,000 mm/min |
| Minimum Feed Increment | 0.001 mm |
| Spindle | |
| Spindle Taper | N.T.50 |
| Spindle Speed | 3,500 rpm |
| Spindle Speed Stages | 2-speed Gear Shift |
| Automatic Tool Changer(A.T.C) | |
| Tool Magazine Capacity | 60 ( 90 / 120 ) Tools |
| Tool Holder Type | BT50 |
| Max. Tool Diameter × Length | Ø110 x 500 mm |
| Max. Tool Weight | 20 kg |
| Max. Tool Diameter (Adjacent Pocket Empty) | Ø245 mm |
| Tool Selection | Bi-directional Selection |
| Motors | |
| Spindle Motor (30-min Rated / Continuous) | 18.5 Kw / 15 Kw |
| X Axis Servo Motor | 3 Kw + 3 Kw |
| Y Axis Servo Motor | 3 Kw + 3 Kw |
| Z Axis Servo Motor | 3 Kw + 3 Kw |
| Others | |
| Machine Net Weight | 40,000 kg |
| Overall Dimension | 10,600 x 6,700 x 4,575 mm |
We reserve the right to modify the design without prior notice.
Spindle Cooling Unit
Heat Exchanger
Automatic Pallet Changer
Separate Manual Pulse Generator
X, Y, Z Linear Guideways
Flood Coolant System
Coolant Tank
Screw Chip Conveyor
Sleep Switch
Warning Light
Work light
Tool Box
Tool Magazine Capacity: 60, 90
Through-Spindle Coolant
Hinge Belt Chip Conveyor with Chip Cart
BT40 / 15,000 rpm Direct-Drive Spindle
Automatic Tool Length Measurement
Automatic Centering Device
0.001° B-axis Continuous Indexing
