Table | |
|---|---|
| Table Size | 2,200 x 1,500 mm |
| T-Slots (Width × Qty × Pitch) | 22 x 9 x 150 mm |
| Max. Load Capacity | 6,000 kgw |
| Travel | |
| X Axis Travel | 2,200 mm |
| Y Axis Travel | 1,600 mm |
| Z Axis Travel | 800 mm (Optional: 1,100 mm) |
Distance from Spindle Nose to Table Surface | 200 ~ 1,000 mm |
| Effective Column Width | 1,700 mm |
| Guideway Type (X,Y,Z Axis) | 55 Type Roller Linear Guideway |
| X,Y,Z Axis Drive | X: Belt Drive , YZ: Direct Coupled |
| Feed | |
| X Axis Rapid | 20 m/min |
| Y Axis Rapid | 20 m/min |
| Z Axis Rapid | 20 m/min |
| Cutting Feedrate | 10,000 mm/min |
| Minimum Feed Increment | 0.001 mm |
| Spindle | |
| Spindle Type | Direct-Drive (Optional: Gear Head) |
| Spindle Motor | α i 15 / 10,000 , 15(20) / 18.5(24.8) |
| Spindle Taper | N.T.50 |
| Spindle Speed | 10,000 rpm (Optional: 6,000 rpm) |
| Spindle Bearing Size | Ø90 mm (Optional: Ø100 mm) |
| Cooling / Lubrication | Oil Cooling / Grease Lubrication |
| Automatic Tool Changer (A.T.C) | |
| Tool Magazine Capacity | 40 Tools |
| Tool Holder Type | B.T.50 |
| Pull Stud Style | 45° Half-Cam Pull Stud |
| Max. Tool Weight | 18 kgw |
| Max. Tool Length | 400 mm |
| Max. Tool Diameter (Adjacent Pocket Empty) | 125 mm |
| Tool Selection Method | Bi-directional Random Tool Selection |
| Motors | |
| X-Axis Servo Motor | 7 Kw (9.3HP) |
| Y-Axis Servo Motor | 7 Kw (9.3HP) |
| Z-Axis Servo Motor | 7 Kw (9.3HP) |
| CNC Controller | |
| Controller | FANUC 0i (OP：31i) |
| Installation Requirements | |
| Required Power | 50 KVA |
| Air Pressure | 6 bar |
| Coolant Pump | 1 1/4 HP |
| Coolant Tank Capacity | 400L Upward Type (Optional: Hinge Belt Type) |
| Machine Weight | 25,000 kgw |
| Machine Footprint | 7,830 x 5,045 mm |
We reserve the right to modify the design without prior notice.
Spindle Cooling Unit
Ring Coolant Device
Heat Exchanger
Portable Manual Pulse Generator
Upward Chip Conveyor + Chip Cart
Screw Chip Conveyor Cart
3-Color Warning Light
Work Light
Tools & Tool Box
Fully Enclosed Guard
BT50 Gear Head Spindle, 6,000 rpm
Coolant System
Spindle Through Coolant Unit (Type A) + High Pressure Filter Barrel
Spindle Through Coolant Unit (Type A) + Paper Band Filter
Deep Hole Drilling Device
Mist Lubrication Unit
Hinge Belt Chip Conveyor + Chip Cart
Oil-Water Separator
Automatic Centering Device
X,Y,Z Axis Linear Scale Feedback System
Tool Breakage Detection Device
Tool Length Measuring Device
Tool Setter
Buzzer
90° Milling Head
60-Tool Magazine
Coolant & Air Gun
Air Chiller
