Table | |
|---|---|
| Table Size | 3,500 x 1,350 mm |
| T-Slots (Width × Qty × Pitch) | 22 x 9 x 150 mm |
| Max. Load Capacity | 5,000 kgw |
| Table Height from Floor | 905 mm |
| Travel | |
| X Axis Travel | 3,200 mm |
| Y Axis Travel | 1,300 mm |
| Z Axis Travel | 760 mm |
Distance from Spindle Nose to Table Surface | 200 ~ 960 mm |
| Effective Column Width | 1,400 mm |
| Feed | |
| Rapid Feedrate | 10 / 15 /15 m/min |
| Cutting Feedrate | 1 ~ 10,000 mm/min |
| Minimum Feed Increment | 0.001 mm |
| Spindle | |
| Spindle Taper | NO.50 |
| Spindle Speed | 60 ~ 6,000 rpm |
| Spindle Bearing Size | Ø100 mm |
| Cooling / Lubrication | Oil Cooling / Grease Lubrication |
| Automatic Tool Changer (A.T.C) | |
| Tool Magazine Capacity | 32 (40 / 60) Tools |
| Tool Holder Type | B.T.50 (BBT40) |
| Max. Tool Weight | 18 kgw |
| Max. Tool Length | 400 mm |
| Max. Tool Diameter | Ø125 mm |
| Max. Diameter (Adjacent Pockets Empty) | Ø250 mm |
| Tool Selection Method | Bi-directional Tool Selection |
| Motors | |
| Spindle Motor (30min / Continuous) | 18.5 / 15 (15 / 11) kw |
| X-Axis Servo Motor | 6 Kw |
| Y-Axis Servo Motor | 4.2 Kw |
| Z-Axis Servo Motor | 4.2 Kw |
| CNC Controller | |
| Controller | FANUC 0iMC |
| Installation Requirements | |
| Required Power | 54 KVA |
| Air Pressure | 5 ~ 7 bar |
| Air Flow Rate | 100 ℓ/min |
| Machine Weight | 27,000 kgw |
| Machine Footprint | 4,235 x 11,000 mm |
We reserve the right to modify the design without prior notice.
Spindle Cooling Unit
Ring Coolant Device
Heat Exchanger
Portable Manual Pulse Generator
Upward Chip Conveyor + Chip Cart
Screw Chip Conveyor Cart
3-Color Warning Light
Work Light
Tools & Tool Box
Fully Enclosed Guard
BBT40 Spindle, 15,000 rpm
Coolant System
Spindle Through Coolant Unit (Type A) + High Pressure Filter Barrel
Spindle Through Coolant Unit (Type A) + Paper Band Filter
Deep Hole Drilling Device
Mist Lubrication Unit
Hinge Belt Chip Conveyor + Chip Cart
Oil-Water Separator
Automatic Centering Device
X,Y,Z Axis Linear Scale Feedback System
Tool Breakage Detection Device
Tool Length Measuring Device
Tool Setter
90° Milling Head
40 / 60 Tools Magazine
Coolant & Air Gun
Air Chiller
