Table | |
|---|---|
| Table Size | 950 x 550 mm |
| T-Slots (Width × Qty × Pitch) | 18 x 3 x 150 mm |
| Max. Table Load | 800 kg |
| Travel | |
| X Axis Travel | 860 mm |
| Y Axis Travel | 550 mm |
| Z Axis Travel (Spindle Head) | 550 mm |
| Distance from Spindle Nose to Table | 150 ~ 700 mm |
| Distance from Spindle Center to Column Front | 600 mm |
| Roller Screw Oil Cooling | None |
| Guideway Type (X,Y,Z) | Linear Guide |
| Feed | |
| X Axis Rapid Traverse | 40 m/min |
| Y Axis Rapid Traverse | 40 m/min |
| Z Axis Rapid Traverse | 30 m/min |
| Cutting Feedrate | 10,000 mm/min |
| Minimum Feed Increment | 0.001 mm |
| Spindle | |
| Spindle Type | Belt Driven |
| Spindle Motor (30min Rating) | 11 Kw |
| Spindle Motor (Continuous Rating) | 7.5 Kw |
| Spindle Taper | NT.40 |
| Spindle Speed | 8,000 rpm |
| Front Bearing Size | Ø70 mm |
| Max. Spindle Torque | 47.7 N-m |
| Cooling / Lubrication | Oil Cooling / Grease Lubrication |
| Motors | |
| X Axis Servo Motor | 3 Kw |
| Y Axis Servo Motor | 3 Kw |
| Z Axis Servo Motor | 4 Kw |
| Others | |
| Required Power | 36 KVA |
| Air Pressure Requirement(Supply) | 6 kg / cm2 |
| Coolant Pump | 3/4 HP |
| Coolant Tank Capacity (Total / Effective) | 300 L |
| Machine Weight | 5,400 kgf |
| Machine Footprint | 2,260 x 2,900 mm |
We reserve the right to modify the design without prior notice.
Heat Exchanger
Portable Manual Pulse Generator
Fully Enclosed Guard
RS-232 Interface
Automatic Power-off Function
Warning Light
Automatic Lubrication Device
Work Light
Tools & Tool Box
Spare Fuse
Swivel Control Panel
Spindle Cooler
24-Tool Cam Type ATC
Chip Augers on Base
Screw Chip Conveyor
Hinged Belt Chip Conveyor with Chip Cart
4th Axis Control
Spindle Through Coolant Device with Filter
Base Chip Flushing Device
Automatic Tool Length Measuring Device
Automatic Workpiece Measuring Device
Linear Scale
Direct Drive Spindle 12,000 / 15,000 rpm
Built-in Spindle 15,000 rpm
