Table | |
|---|---|
| Table Size | 2,500 x 1,350 mm |
| T-Slots (Width × Qty × Pitch) | 22 x 9 x 150 mm |
| Max. Load | 4,000 kgw |
| Table Height from Floor | 905 mm |
| Travel | |
| X Axis Travel | 2,200 mm |
| Y Axis Travel | 1,300 mm |
| Z Axis Travel | 760 mm |
Distance from Spindle Nose to Table Surface | 200 ~ 960 mm |
| Effective Column Width | 1,400 mm |
| Feed | |
| Rapid Traverse | 12 / 15 / 15 m/min |
| Cutting Feedrate | 1 ~ 10,000 mm/min |
| Minimum Feed Increment | 0.001 mm |
| Spindle | |
| Spindle Taper | No.50 (No.40) |
| Spindle Speed | 60 ~ 6,000 (15,000) rpm |
| Spindle Bearing Size | Ø100 (Ø70) mm |
| Cooling / Lubrication | Oil Cooling / Grease Lubrication |
| Motors | |
| Spindle Motor (30min / Continuous) | 18.5 / 15 (15 / 11) kW |
| 3-Axis Motor (X, Y, Z) | 6 / 4.2 / 4.2 kW |
| CNC Controller | |
| Controller | FANUC 0iMC |
| Installation Requirements | |
| Power Supply | 220V±10% ; 50/60Hz ± 2% ; 54KVA |
| Air Pressure | 5 ~ 7 bar (kg/cm²) |
| Air Flow | 100 ℓ/min |
| Net Weight | 23,000 kgw |
| Floor Space | 4,235 x 8,500 mm |
We reserve the right to modify the design without prior notice.
Spindle Cooling Unit
Ring Coolant Device
Heat Exchanger
Portable Manual Pulse Generator
Upward Chip Conveyor + Chip Cart
Screw Chip Conveyor Cart
3-Stack Warning Light
Work Light
Tools & Tool Box
Fully Enclosed Guard
BBT40 Spindle, 15,000 RPM
Coolant Oil System
Spindle Through Coolant Unit (Type A) + High Pressure Filter Barrel
Spindle Through Coolant Unit (Type A) + Paper Band Filter
Deep Hole Drilling Device
Mist Lubrication Unit
Hinged Belt Chip Conveyor + Chip Cart
Oil-Water Separator
Automatic Centering Device
X,Y,Z Axis Linear Scale Feedback System
Tool Breakage Detection Device
Tool Length Measuring Device
Tool Setter
90° Angle Head
Tool Magazine 40 / 60 Positions
Coolant & Air Gun
Air Chiller
