Table | |
|---|---|
| Table Size | 4,000 x 2,200 mm |
| T-Slots (Width × Qty × Pitch) | 22 x 11 x 200 mm |
| Max. Load | 12,000 kgw |
| Table Height from Floor | 1,000 mm |
| Travel | |
| X Axis Travel | 4,200 mm |
| Y Axis Travel | 2,500 mm |
| Z Axis Travel | 800 mm |
Distance from Spindle Nose to Table Surface | 200 ~ 1,000 mm |
| Effective Column Width | 2,540 mm |
| Feed | |
| Cutting Feedrate | 10 / 15 / 10 m/min |
| Rapid Traverse | 1 ~ 5,000 mm/min |
| Minimum Feed Increment | 0.001 mm |
| Spindle | |
| Spindle Taper | No.50 |
| Spindle Speed | 6,000 rpm |
| Spindle Bearing Size | Ø100 mm |
| Cooling / Lubrication | Oil Cooling / Grease Lubrication |
| Motors | |
| Spindle Motor (30min / Continuous) | 18.5 / 15 (15 / 11) kW |
| X Axis Servo Motor | 11 kW |
| Y Axis Servo Motor | 5.5 kW |
| Z Axis Servo Motor | 5.5 kW |
| CNC Controller | |
| Controller | FANUC 0iMC |
| Installation Requirements | |
| Power Requirement | 64 KVA |
| Air Pressure | 5 ~ 7 bar |
| Air Flow | 100 ℓ/min |
| Machine Weight | 40,000 kgw |
| Floor Space | 5,650 x 11,120 mm |
We reserve the right to modify the design without prior notice.
Spindle Cooling Unit
Ring Coolant Device
Heat Exchanger
Portable Manual Pulse Generator
Upward Chip Conveyor + Chip Cart
Screw Chip Conveyor Cart
3-Stack Warning Light
Work Light
Tools & Tool Box
Fully Enclosed Guard
BT50 Spindle, 10,000 RPM
BT40 Spindle, 15,000 RPM
Coolant Oil System
Spindle Through Coolant Unit (Type A) + High Pressure Filter Barrel
Spindle Through Coolant Unit (Type A) + Paper Band Filter
Deep Hole Drilling Device
Mist Lubrication Unit
Hinged Belt Chip Conveyor + Chip Cart
Oil-Water Separator
Automatic Centering Device
X,Y,Z Axis Linear Scale Feedback System
Tool Breakage Detection Device
Tool Length Measuring Device
Tool Setter
Buzzer
90° Angle Head
Coolant & Air Gun
Air Chiller
Operation Door Platform
