Designed for high-speed machining, equipped with a 10,000 rpm direct-drive spindle and high-rigidity linear guideways for all three axes.
The oil-water separator adopts stainless steel scrapers.
Independent Coolant Tank of C.T.S System and Multilayer Filter System.
Worktable | |
|---|---|
| Table Size | 800 x 400 mm (31.5 ~ 15.7") |
| Table Height from Floor | 883 mm (34.76") |
| T-Slots (Qty × Width × Pitch) | 3 x 18 x 100 mm (3 x 0.7 x 3.93") |
| Max. Table Load | 250 kg (551lbs) |
| Distance from Spindle Center to Column | 500 mm (19.68") |
| Travel | |
| X Axis Travel | 700 mm (27.5") |
| Y Axis Travel | 400 mm (15.7") |
| Z Axis (Spindle Head) Travel | 600 mm (23.5") |
Distance from Spindle Nose to Table Surface | 150 ~ 750 mm (5.9 ~ 29.5") |
| Feed | |
| Rapid Feedrate | X / Y / Z：48 / 48 / 48 M/min |
| Feed Motor (FANUC) | X / Y：1.8kW , Z：3kW |
| Ball Screw Diameter & Pitch | X / Y / Z：Ø32 mm / 16 mm (1.26 / 0.63") |
| Cutting Feedrate | 1 ~ 10,000 mm/min |
| Drive Type | Direct Drive |
| Spindle | |
| Spindle Taper | BBT40 / BT40 / CAT40 / DIN 69871A |
| Max. Spindle Speed | 10,000 rpm / 12,000 or 15,000 rpm(Optional) |
| Spindle Motor | 7.5 / 11 kW |
| Drive Type | Direct Drive |
| A.T.C. System | |
| Tool Magazine Capacity | 24T / 30T(Optional) |
| ATC Type | Arm Type |
| Max. Tool Diameter | 75 mm (2.95") |
| Max. Tool Diameter (Adjacent Pocket Empty) | Ø150 mm (5.9") |
| Max. Tool Length | 250 mm (9.84") |
| Max. Tool Weight | 7 kg (14.14lbs) |
| Tool Change Time (Tool to Tool) | 1.87 sec |
| Tool Change Time (Chip to Chip) | 4.6 sec |
| Tool Selection Method | Random Selection / Bi-directional Magazine Rotation |
| Special Tool Configuration | Available |
| Cooling System | |
| Coolant Tank Capacity | 200 L |
| Coolant Flow Rate | 130 L/min |
| Chip Flushing Flow Rate | 130 L/min |
| Machine Dimensions | |
| Machine Height | 3,010 mm |
| Machine Footprint | 1,990 x 3,180 mm (78.3 x 125.2") |
| Machine Weight | 4,000 kg (8,815 lbs) |
| Power Supply | |
| Power Supply | 30 kVA / 3PH , 220V 50/60 HZ |
| Compressed Air Supply | 6.0 kgf/cm2 (85psi) (0.6Mpa) |
We reserve the right to modify design without prior notice.
Electrical Cabinet Heat Exchanger
Fully Enclosed Guard
Automatic Lubrication Device
Automatic Power-off Function
Tools & Tool Box
RS-232 Interface
Spindle Cooler
Ring Coolant Nozzle
Rigid Tapping Tool
Warning Light
Work Light
Electrical Cabinet Air Conditioner Cooler
Coolant Spray Gun & Air Blow Gun
Spindle Through Coolant Device
Automatic Tool Length Measuring Device
Automatic Workpiece Measuring Probe
Hinge Belt Chip Conveyor
Upward Tilt Chip Conveyor
Oil-Water Separator
4th Axis
