Worktable | |
|---|---|
| Table Size | 1,120 x 560 mm |
| T-Slots (Width × Qty.) | 18 x 5 mm |
| Max. Table Load | 1,000 kg |
| Table Height from Floor | 900 mm |
| Travel | |
| X Axis Travel | 1,050 mm |
| Y Axis Travel | 560 mm |
| Z Axis (Spindle Head) Travel | 560 mm |
| Distance from Spindle Nose to Table Surface | 150 ~ 710 mm |
| Distance from Spindle Center to Column Front | 600 mm |
| Feed | |
| X/Y/Z Cutting Feed Rate | 1~10,000 mm/min |
| X/Y/Z Rapid Traverse | 30／30／18 m/min |
| Minimum Input Increment | 0.001 mm |
| Spindle | |
| Spindle Taper | N.T.40／N.T.50 |
| Spindle Speed | 80 ~ 8,000 rpm |
| Spindle Motor | α8／8,000i |
| Spindle Speed Stages | 2-Speed Gear Type |
| Automatic Tool Changer(A.T.C) | |
| Tool Magazine Capacity | 24 Tools |
| Tool Holder Type | BT40／BT50 |
| Tool Diameter × Length | Ø75 x 300／Ø105 x 300 |
| Max. Tool Weight | 7 ／ 15 kg |
| Max. Tool Diameter (Adjacent Pockets Empty) | Ø90／200 mm |
| Tool Selection Method | Random Selection |
| Motors | |
| Spindle Motor (30-min / Continuous) | 7.5 kw (10hp)／11 kw(14.7 hp) |
| X Axis Servo Motor | 2.5 Kw |
| Y Axis Servo Motor | 2.5 Kw |
| Z Axis Servo Motor | 3.0 Kw |
| Installation Requirements | |
| Machine Net Weight | 8,000 kg |
| Floor Space (X × Y) | 3,730 x 3,105 mm |
We reserve the right to modify the design without prior notice.
Electrical Cabinet Heat Exchanger
Fully Enclosed Guard
Automatic Lubrication Device
Automatic Power-off Function
Tools & Tool Box
RS-232 Interface
Spindle Chiller
Ring Coolant Nozzle
Rigid Tapping
Warning Light
Work Light
Electrical Cabinet Air Conditioner
Coolant & Air Gun
Spindle Through Coolant Device
Automatic Tool Length Measuring Device
Automatic Workpiece Measuring Device
Hinge Belt Chip Conveyor
Upward Tilt Chip Conveyor
Oil-Water Separator
Chip Flushing Device
Linear Scale
4th Axis
