Worktable | ||
|---|---|---|
| Table Size | 1,300 x 640 mm | |
| T-Slots (Width × Qty. × Pitch) | 18 x 5 x 125 mm | |
| Max. Table Load | 1,000 kg | |
| Travel | ||
| X Axis Travel | 1,200 mm | |
| Y Axis Travel | 600 mm | |
| Z Axis (Spindle Head) Travel | 500 mm | 600 mm |
| Distance from Spindle Nose to Table Surface | 100 ~ 600 mm | 150 ~ 750 mm |
| Distance from Spindle Center to Column Front | 805 mm | 805 mm |
| Guideway Type (X,Y,Z) | Linear Guideways | Linear Guideways for X,Y / Box Guideway for Z |
| Feed | ||
| X Axis Rapid Traverse | 30 m/min | |
| Y Axis Rapid Traverse | 30 m/min | |
| Z Axis Rapid Traverse | 18 m/min | |
| Cutting Feed Rate | 10,000 mm/min | |
| Minimum Input Increment | 0.001 mm | |
| Spindle | ||
| Spindle Type | Direct-Drive | Belt-Driven |
| Spindle Motor (30-min / Continuous) | 7.5 Kw / 5.5 Kw | 11 Kw / 7.5 Kw |
| Spindle Taper | N.T.40 | |
| Spindle Speed | 10,000 rpm | 8,000 rpm |
| Spindle Bearing Size | Ø70 | Ø70 |
| Spindle Bearing Lubrication | Grease Lubrication | Grease Lubrication |
| Automatic Tool Changer(A.T.C) | ||
| Tool Magazine Capacity | 24 Tools | |
| Tool Holder Type | BT40 | |
| Pull Stud Type | 45° Finger Pull Claw | |
| Max. Tool Weight | 7 kg | |
| Max. Tool Length | 300 mm | |
| Max. Tool Diameter (Adjacent Pocket Empty) | Ø90 (180) mm | |
| Tool Selection Method | Random Selection | |
| Motors | ||
| X Axis Servo Motor | 2.5 Kw | 2.5 Kw |
| Y Axis Servo Motor | 2.5 Kw | 2.5 Kw |
| Z Axis Servo Motor | 2.5 Kw | 3 Kw |
| Others | ||
| Required Power | 36 KVA | |
| Air Pressure Requirement (Supply) | 6 kg/cm² | |
| Coolant Pump | 3/4 HP | |
| Coolant Tank Capacity | 365L | |
| Machine Weight | 7,500 kg | |
| Floor Space | 3,150 x 4,060 mm | |
We reserve the right to modify the design without prior notice.
Heat Exchanger
Portable Manual Pulse Generator
Fully Enclosed Guard
RS-232 Interface
Automatic Power-off Function
3-Color Warning Light
Automatic Lubrication Device
Work Light
Tools & Tool Box
Spare Fuses
Swivel Control Panel
Spindle Cooler
Rigid Tapping
Chip Augers on Base
Screw Chip Conveyor
Hinge Belt Chip Conveyor with Chip Cart
4th Axis Control
Spindle Through Coolant with Filter
Base Chip Flushing Device
Automatic Tool Length Measuring Device
Automatic Centering Device
Linear Scale
12,000 / 15,000 rpm Direct-Drive Spindle
15,000 rpm Built-in Spindle
Hollow Oil-Cooled Ball Screw
30, 32, 40-Tool Cam ATC System
Cam ATC (32 / 40 Tools Optional)
Max. Tool Diameter × Length Ø76 x 300 mm
Max. Tool Weight 7 kg
Max. Tool Diameter (Adjacent Pocket Empty) Ø150
Z-Axis Roller Linear Guideway
