Worktable | |
|---|---|
| Table Size | 950 x 550 mm |
| T-Slots (Width × Qty. × Pitch) | 18 x 3 x 150 mm |
| Max. Table Load | 800 kg |
| Travel | |
| X Axis Travel | 860 mm |
| Y Axis Travel | 550 mm |
| Z Axis (Spindle Head) Travel | 550 mm |
| Distance from Spindle Nose to Table Surface | 150 ~ 700 mm |
| Distance from Spindle Center to Column Front | 600 mm |
| Ball Screw Oil Cooling | None |
| Guideway Type (X,Y,Z) | Linear Guideway |
| Feed | |
| X Axis Rapid Feed | 40 m/min |
| Y Axis Rapid Feed | 40 m/min |
| Z Axis Rapid Feed | 30 m/min |
| Cutting Feed Rate | 10,000 mm/min |
| Minimum Feed Increment | 0.001 mm |
| Spindle | |
| Spindle Type | Belt Driven |
| Spindle Motor (30 min Rating) | 11 Kw |
| Spindle Motor (Continuous) | 7.5 Kw |
| Spindle Taper | NT.40 |
| Spindle Speed | 8,000 rpm |
| Shaft End Bearing Size | Ø70 mm |
| Max. Spindle Torque | 47.7N-m |
| Cooling / Lubrication Method | Oil Cooling / Grease Lubrication |
| Automatic Tool Changer(A.T.C) | |
| Tool Magazine Capacity | 24 Tools |
| Tool Holder Type | BT40 |
| Pull Stud Type | 45° Finger Pull Head |
| Max. Tool Weight | 7 kg |
| Max. Tool Length | 300 mm |
| Max. Tool Diameter (Adjacent Pocket Empty) | Ø90 ( 140 ) mm |
| Tool Selection Method | Random |
| Motors | |
| X Axis Servo Motor | 3 Kw |
| Y Axis Servo Motor | 3 Kw |
| Z Axis Servo Motor | 4 Kw |
| Others | |
| Required Power | 36 KVA |
| Air Pressure Requirement (Supply) | 6 kg / cm2 |
| Coolant Pump | 3/4 HP |
| Coolant Tank Capacity (Total / Effective) | 300 L |
| Machine Weight | 5,400 kgf |
| Machine Footprint | 2,260 x 2,900 mm |
We reserve the right to modify design without prior notice.
Heat Exchanger
Portable Manual Pulse Generator
Fully Enclosed Guard
RS-232 Interface
Automatic Power-off Function
Warning Light
Automatic Lubrication Device
Work Light
Tools & Tool Box
Spare Fuses
Swivel Control Panel
Spindle Cooler
24-Tool Cam ATC System
Chip Augers on Base
Screw Chip Conveyor
Hinge Belt Chip Conveyor with Chip Cart
4th Axis Control
Spindle Through Coolant with Filter
Base Chip Flushing Device
Automatic Tool Length Measuring Device
Automatic Workpiece Measuring Probe
Linear Scale
30, 32, 40-Tool Cam ATC System
12,000 / 15,000 rpm Direct-Drive Spindle
15,000 rpm Built-in Spindle
