Worktable | |
|---|---|
| Table Size | 1,250 x 660 mm |
| T-Slots (Width × Qty.) | 18 x 5 mm |
| Max. Table Load | 1,000 kg |
| Travel | |
| X Axis Travel | 1,020 mm |
| Y Axis Travel | 550 mm |
| Z Axis (Spindle Head) Travel | 560 mm |
| Distance from Spindle Nose to Table Surface | 150 ~ 710 mm |
| Distance from Spindle Center to Column Front | 600 mm |
| Feed | |
| X Axis Rapid Traverse | 30 m/min |
| Y Axis Rapid Traverse | 30 m/min |
| Z Axis Rapid Traverse | 20 m/min |
| Cutting Feed Rate | 10,000 mm/min |
| Minimum Input Increment | 0.001 mm |
| Spindle | |
| Spindle Taper | NT.40 |
| Spindle Speed | 8,000 rpm |
| Spindle Speed Range | Infinite variable |
| Automatic Tool Changer(A.T.C) | |
| Tool Magazine Capacity | 16 Tools |
| Tool Holder Type | BT40 |
| Max. Tool Diameter × Length | Ø90 x 300 mm |
| Max. Tool Weight | 6 kg |
| Tool Selection Method | Bi-Directional |
| Motors | |
| Spindle Motor (30-min Rating) | 11 Kw |
| Spindle Motor (Continuous) | 7.5 Kw |
| X Axis Servo Motor | 3 Kw |
| Y Axis Servo Motor | 3 Kw |
| Z Axis Servo Motor | 4.2 Kw |
| Others | |
| Machine Weight | 6,000 kg |
| Floor Space | 3,575 x 4,000 mm |
We reserve the right to modify the design without prior notice.
Heat Exchanger
Portable Manual Pulse Generator
Ring Coolant Nozzle
Semi-enclosed Guard
RS-232 Interface
Automatic Power-off Function
Warning Light
Automatic Lubrication Device
Work Light
Tools & Tool Box
Spare Fuses
Suspended Control Panel
Spindle Cooler
Rigid Tapping
Fully Enclosed Guard
Screw Chip Conveyor
Hinge Belt Chip Conveyor with Chip Cart
4th Axis Junction Box
Deep Hole Drilling
Spindle Through Coolant with Filter
Chip Flushing Device
Automatic Tool Length Measuring Device
Automatic Centering Probe (Renishaw OMP-60)
Automatic Work Changer
Cam ATC (24 Tools)
Max. Tool Diameter × Length: Ø70 x 300 mm
Max. Tool Weight: 7 kg
Max. Tool Diameter (Adjacent Pocket Empty): Ø127
Direct-Drive Spindle 10,000 rpm, 12,000 rpm, 15,000 rpm
Built-in Spindle 15,000 rpm, 20,000 rpm
Graphite Filtration System
