Worktable | |
|---|---|
| Table Size | 1,200 x 580 mm |
| T-Slots (Width × Qty. × Pitch) | 18 x 3 x 150 mm |
| Max. Table Load | 1,000 kg |
| Travel | |
| X Axis Travel | 1,060 mm |
| Y Axis Travel | 560 mm |
| Z Axis (Spindle Head) Travel | 550 mm |
| Distance from Spindle Nose to Table Surface | 150 ~ 710 mm |
| Distance from Spindle Center to Column Front | 600 mm |
| Ball Screw Oil Cooling | No |
| Guideway Type (X,Y,Z) | Linear Guideways |
| Feed | |
| X Axis Rapid Traverse | 40 m/min |
| Y Axis Rapid Traverse | 40 m/min |
| Z Axis Rapid Traverse | 30 m/min |
| Cutting Feed Rate | 10,000 mm/min |
| Minimum Input Increment | 0.001 mm |
| Spindle | |
| Spindle Type | Belt-Driven |
| Spindle Motor (30-min / Continuous) | 11 Kw / 7.5 Kw |
| Spindle Taper | N.T.40 |
| Spindle Speed | 8,000 rpm |
| Spindle End Bearing Size | Ø70 mm |
| Max. Spindle Torque | 47.7 N-m |
| Cooling / Lubrication | Oil Cooling / Grease Lubrication |
| Automatic Tool Changer(A.T.C) | |
| Tool Magazine Capacity | 24 Tools |
| Tool Holder Type | BBT40 |
| Pull Stud Type | 45° Finger Pull Claw |
| Max. Tool Length | 300 mm |
| Max. Tool Weight | 7 kg |
| Max. Tool Diameter (Adjacent Pocket Empty) | Ø90 (150) mm |
| Tool Selection Method | Random |
| Motors | |
| X Axis Servo Motor | 3 Kw |
| Y Axis Servo Motor | 3 Kw |
| Z Axis Servo Motor | 4 Kw |
| Others | |
| Required Power | 36 KVA |
| Air Pressure Requirement (Supply) | 6 kg/cm² |
| Coolant Pump | 3/4 HP |
| Coolant Tank Capacity (Total / Effective) | 300L |
| Machine Weight | 6,000 kg |
| Floor Space | 2,900 x 3,895 mm |
We reserve the right to modify the design without prior notice.
Heat Exchanger
Portable Manual Pulse Generator
Fully Enclosed Guard
RS-232 Interface
Automatic Power-off Function
Warning Light
Automatic Lubrication Device
Work Light
Tools & Tool Box
Spare Fuses
Swivel Control Panel
Spindle Cooler
24-Tool Cam ATC System
Rigid Tapping
Chip Augers on Base
Barrel Screw Chip Conveyor
Hinge Belt Chip Conveyor with Chip Cart
Full 4th Axis Readiness
Spindle Through Coolant Device
Guard Base Chip Flushing Unit
Automatic Tool Length Measuring Device
Automatic Workpiece Measuring Device
Linear Scale
30, 32, 40-Tool Cam ATC System
12,000 / 15,000 rpm Direct-Drive Spindle
15,000 rpm Built-in Spindle
